#!/bin/bash
do {
	#------------------------------------------------------------------------------------------------
	# Optimize current Debian installation and prep for DietPi installation.
	#------------------------------------------------------------------------------------------------
	# REQUIREMENTS
	# - Currently running Debian (ideally minimal, eg: Raspbian Lite-ish =)) )
	# - Active eth0 connection
	#------------------------------------------------------------------------------------------------

	#Use master branch, if unset
	setglobal GIT_BRANCH = $(GIT_BRANCH:=master)
	echo -e "Git Branch: $GIT_BRANCH"

	#Ensure we are in users home dir: https://github.com/Fourdee/DietPi/issues/905#issuecomment-298223705
	cd $HOME

	#------------------------------------------------------------------------------------------------
	# Critical checks and pre-reqs, with exit, prior to initial run of script
	#------------------------------------------------------------------------------------------------
	#Exit path for non-root logins.
	if sh-expr ' $UID != 0 ' {

		echo -e 'Error: Root privileges required. Please run the command with "sudo"\nIn case install the "sudo" package with root privileges: #apt-get install sudo\n'
		exit 1

	}

	# - APT force IPv4
	echo 'Acquire::ForceIPv4 "true";' > /etc/apt/apt.conf.d/99-dietpi-force-ipv4

	#Check/install minimal APT Pre-Reqs
	setglobal a_MIN_APT_PREREQS = ''(

		'wget'
		'ca-certificates'
		'locales'

	)

	# - Meveric special: https://github.com/Fourdee/DietPi/issues/1285#issuecomment-355759321
	rm /etc/apt/sources.list.d/deb-multimedia.list &> /dev/null

	apt-get clean
	apt-get update
	for (( i=0; i<${#a_MIN_APT_PREREQS[@]}; i++))
	do

		if (( ! $(dpkg --get-selections | grep -ci -m1 "^${a_MIN_APT_PREREQS[$i]}[[:space:]]") )); then

			apt-get install -y ${a_MIN_APT_PREREQS[$i]}
			if (( $? != 0 )); then

				echo -e "Error: Unable to install ${a_MIN_APT_PREREQS[$i]}, please try to install it manually with\n - apt-get install -y ${a_MIN_APT_PREREQS[$i]}"
				exit 1

			fi

		fi

	done

	unset a_MIN_APT_PREREQS

	# - Wget prefer IPv4
	grep -q '^[[:blank:]]*prefer-family =' /etc/wgetrc &&
	sed -i '/^[[:blank:]]*prefer-family =/c\prefer-family = IPv4' /etc/wgetrc ||
	grep -q '^[[:blank:]#;]*prefer-family =' /etc/wgetrc &&
	sed -i '/^[[:blank:]#;]*prefer-family =/c\prefer-family = IPv4' /etc/wgetrc ||
	echo 'prefer-family = IPv4' >> /etc/wgetrc

	#Setup locale
	#	NB: DEV, any changes here must be also rolled into function '/DietPi/dietpi/func/dietpi-set_software locale', for future script use
	echo 'en_GB.UTF-8 UTF-8' > /etc/locale.gen
	dpkg-reconfigure -f noninteractive locales
	# dpkg-reconfigure includes:
	#	- "locale-gen": Generate locale(s) based on "/etc/locale.gen" or interactive selection.
	#	- "update-locale": Add $LANG to "/etc/default/locale" based on generated locale(s) or interactive default language selection.
	if sh-expr ' $? != 0 ' {

		echo -e 'Error: Locale generation failed. Aborting...\n'
		exit 1

	}

	cat << """ > /etc/profile.d/99-dietpi-force-locale.sh
# Force locale on remote access, especially via dropbear, where overwriting server locale by SSH client cannot be suppressed:
export LANG=en_GB.UTF-8
export LC_ALL=en_GB.UTF-8
export LANGUAGE=en_GB:en
"""
> /etc/profile.d/99-dietpi-force-locale.sh
# Force locale on remote access, especially via dropbear, where overwriting server locale by SSH client cannot be suppressed:
export LANG=en_GB.UTF-8
export LC_ALL=en_GB.UTF-8
export LANGUAGE=en_GB:en
_EOF_
	chmod +x /etc/profile.d/99-dietpi-force-locale.sh

	#Force en_GB Locale for rest of script. Prevents incorrect parsing with non-english locales.
	setglobal LANG = 'en_GB.UTF-8'

	#------------------------------------------------------------------------------------------------
	#Globals
	#------------------------------------------------------------------------------------------------
	#Download DietPi-Globals
	# - NB: we'll have to manually handle errors, until script is sucessfully loaded
	wget https://raw.githubusercontent.com/Fourdee/DietPi/$GIT_BRANCH/dietpi/func/dietpi-globals -O dietpi-globals
	if sh-expr ' $? != 0 ' {

		echo -e 'Error: Unable to download dietpi-globals. Aborting...\n'
		exit 1

	}

	# - load
	chmod +x dietpi-globals
	source ./dietpi-globals
	if sh-expr ' $? != 0 ' {

		echo -e 'Error: Unable to load dietpi-globals. Aborting...\n'
		exit 1

	}

	export G_PROGRAM_NAME='DietPi-PREP_SYSTEM_FOR_DIETPI'
	export G_DISTRO=0 # Export to dietpi-globals
	export G_DISTRO_NAME='NULL' # Export to dietpi-globals
	setglobal DISTRO_TARGET = '0'
	setglobal DISTRO_TARGET_NAME = ''''
	if grep -q 'wheezy' /etc/os-release {

		setglobal G_DISTRO = '2'
		setglobal G_DISTRO_NAME = ''wheezy''

	} elif grep -q 'jessie' /etc/os-release {

		setglobal G_DISTRO = '3'
		setglobal G_DISTRO_NAME = ''jessie''

	} elif grep -q 'stretch' /etc/os-release {

		setglobal G_DISTRO = '4'
		setglobal G_DISTRO_NAME = ''stretch''

	} elif grep -q 'buster' /etc/os-release {

		setglobal G_DISTRO = '5'
		setglobal G_DISTRO_NAME = ''buster''

	} else {

		echo -e 'Error: Unknown or unsupported distribution version. Aborting...\n'
		exit 1

	}

	#G_HW_MODEL # init from dietpi-globals
	#G_HW_ARCH_DESCRIPTION # init from dietpi-globals
	setglobal G_HW_ARCH_DESCRIPTION = $[uname -m]
	if test $G_HW_ARCH_DESCRIPTION = "armv6l" {

		setglobal G_HW_ARCH = '1'

	} elif test $G_HW_ARCH_DESCRIPTION = "armv7l" {

		setglobal G_HW_ARCH = '2'

	} elif test $G_HW_ARCH_DESCRIPTION = "aarch64" {

		setglobal G_HW_ARCH = '3'

	} elif test $G_HW_ARCH_DESCRIPTION = "x86_64" {

		setglobal G_HW_ARCH = '10'

	} else {

		echo -e "Error: Unknown or unsupported CPU architecture $G_HW_ARCH_DESCRIPTION. Aborting..."
		exit 1

	}

	#URL connection test var holder
	setglobal INTERNET_ADDRESS = ''''

	#Whiptail
	setglobal WHIP_BACKTITLE = ''DietPi-Prep''
	setglobal WHIP_TITLE = '0'
	setglobal WHIP_DESC = '0'
	setglobal WHIP_MENU_ARRAY = '0'
	setglobal WHIP_RETURN_VALUE = '0'
	setglobal WHIP_DEFAULT_ITEM = '0'
	setglobal WHIP_OPTION = '0'
	setglobal WHIP_CHOICE = '0'
	proc Run_Whiptail{

		setglobal WHIP_OPTION = $[whiptail --title $WHIP_TITLE --menu $WHIP_DESC --default-item $WHIP_DEFAULT_ITEM --backtitle $WHIP_BACKTITLE 24 85 12 $(WHIP_MENU_ARRAY[@]) !3 > !1 !1 > !2 !2 > !3]
		setglobal WHIP_CHOICE = $Status
		if sh-expr ' $WHIP_CHOICE == 0 ' &&
			test -n $WHIP_OPTION {

			setglobal WHIP_RETURN_VALUE = $WHIP_OPTION

		} else {

			G_DIETPI-NOTIFY 1 'No choices detected, aborting...'
			exit 0

		}

		#delete []
		unset WHIP_MENU_ARRAY

	}

	#------------------------------------------------------------------------------------------------
	#------------------------------------------------------------------------------------------------
	#------------------------------------------------------------------------------------------------
	# MAIN LOOP
	#------------------------------------------------------------------------------------------------
	#------------------------------------------------------------------------------------------------
	#------------------------------------------------------------------------------------------------

	#------------------------------------------------------------------------------------------------
	echo -e ''
	G_DIETPI-NOTIFY 2 '-----------------------------------------------------------------------------------'
	G_DIETPI-NOTIFY 0 'Step 0: Detecting existing DietPi system:'
	G_DIETPI-NOTIFY 2 '-----------------------------------------------------------------------------------'
	#------------------------------------------------------------------------------------------------
	if sh-expr ' $(systemctl is-active dietpi-ramdisk | grep -ci -m1 '^active') ' {

		G_DIETPI-NOTIFY 2 'DietPi system found, running pre-prep'

		# - Stop services
		/DietPi/dietpi/dietpi-services stop

		G_RUN_CMD systemctl stop dietpi-ramlog
		G_RUN_CMD systemctl stop dietpi-ramdisk

		# - Delete any previous exsiting data
		rm -R /DietPi/*
		rm -R /boot/dietpi

		rm -R /mnt/dietpi-backup &> /dev/null
		rm -R /mnt/dietpi-sync &> /dev/null
		rm -R /mnt/dietpi_userdata &> /dev/null

		rm -R /etc/dietpi &> /dev/null # Pre v160
		rm -R /var/lib/dietpi &> /dev/null
		rm -R /var/tmp/dietpi &> /dev/null

		rm /root/DietPi-Automation.log &> /dev/null
		rm /boot/Automation_Format_My_Usb_Drive &> /dev/null

	} else {

		G_DIETPI-NOTIFY 2 'Non-DietPi system'

	}

	#------------------------------------------------------------------------------------------------
	echo -e ''
	G_DIETPI-NOTIFY 2 '-----------------------------------------------------------------------------------'
	G_DIETPI-NOTIFY 0 'Step 1: Initial prep to allow this script to function:'
	G_DIETPI-NOTIFY 2 '-----------------------------------------------------------------------------------'
	#------------------------------------------------------------------------------------------------
	G_DIETPI-NOTIFY 2 'Updating APT:'

	#Recreate dietpi logs dir, used by G_AGx
	G_RUN_CMD mkdir -p /var/tmp/dietpi/logs

	G_DIETPI-NOTIFY 2 'Installing core packages, required for next stage of this script:'

	G_AGI apt-transport-https unzip whiptail

	#------------------------------------------------------------------------------------------------
	echo -e ''
	G_DIETPI-NOTIFY 2 '-----------------------------------------------------------------------------------'
	G_DIETPI-NOTIFY 0 'Step 2: Hardware selection:'
	G_DIETPI-NOTIFY 2 '-----------------------------------------------------------------------------------'
	#------------------------------------------------------------------------------------------------

	setglobal WHIP_TITLE = ''Hardware selection:''
	setglobal WHIP_DESC = ''Please select the current device this is being installed on:\n - NB: Select "Generic device" if not listed.''
	setglobal WHIP_DEFAULT_ITEM = '22'
	setglobal WHIP_MENU_ARRAY = ''(

		'' '────Other──────────────────────────────'
		'22' 'Generic device (unknown to DietPi)'
		'' '────SBC────────────────────────────────'
		'52' 'Asus Tinker Board'
		'51' 'BananaPi Pro (Lemaker)'
		'50' 'BananaPi M2+ (sinovoip)'
		'71' 'Beagle Bone Black'
		'66' 'NanoPi M1 Plus'
		'65' 'NanoPi NEO 2'
		'64' 'NanoPi NEO Air'
		'63' 'NanoPi M1/T1'
		'62' 'NanoPi M3/T3'
		'61' 'NanoPi M2/T2'
		'60' 'NanoPi Neo'
		'13' 'Odroid U3'
		'12' 'Odroid C2'
		'11' 'Odroid XU3/4/HC1'
		'10' 'Odroid C1'
		'38' 'OrangePi PC 2'
		'37' 'OrangePi Prime'
		'36' 'OrangePi Win'
		'35' 'OrangePi Zero Plus 2 (H3/H5)'
		'34' 'OrangePi Plus'
		'33' 'OrangePi Lite'
		'32' 'OrangePi Zero (H2+)'
		'31' 'OrangePi One'
		'30' 'OrangePi PC'
		'40' 'Pine A64'
		'3' 'Raspberry Pi 3'
		'2' 'Raspberry Pi 2'
		'1' 'Raspberry Pi 1/Zero (512mb)'
		'0' 'Raspberry Pi 1 (256mb)'
		'43' 'Rock64'
		'70' 'Sparky SBC'
		'' '────PC─────────────────────────────────'
		'21' 'x86_64 Native PC'
		'20' 'x86_64 VMware/VirtualBox'

	)

	Run_Whiptail
	setglobal G_HW_MODEL = $WHIP_RETURN_VALUE

	G_DIETPI-NOTIFY 2 "Setting G_HW_MODEL index of: $G_HW_MODEL"
	G_DIETPI-NOTIFY 2 "CPU ARCH = $G_HW_ARCH : $G_HW_ARCH_DESCRIPTION"

	echo -e $G_HW_MODEL > /etc/.dietpi_hw_model_identifier

	#------------------------------------------------------------------------------------------------
	echo -e ''
	G_DIETPI-NOTIFY 2 '-----------------------------------------------------------------------------------'
	G_DIETPI-NOTIFY 0 'Step 3: Distro selection:'
	G_DIETPI-NOTIFY 2 '-----------------------------------------------------------------------------------'
	#------------------------------------------------------------------------------------------------

	setglobal WHIP_TITLE = ''Distro selection:''
	setglobal WHIP_DESC = ""Please select a distro to install on this system. Selecting a distro that is older than the current installed on system, is not supported.\n\nCurrently installed:\n - $G_DISTRO $G_DISTRO_NAME""
	setglobal WHIP_DEFAULT_ITEM = $G_DISTRO
	setglobal DISTRO_LIST_ARRAY = ''(
		'3' 'Jessie (oldstable, just if you need to avoid upgrade to current release)'
		'4' 'Stretch (current stable release, recommended)'
		'5' 'Buster (testing only, not officially supported)'
	)

	# - Enable/list available options based on criteria
	#	NB: Whiptail use 2 array indexs per whip displayed entry.
	for ((i=0; i<$(( ${#DISTRO_LIST_ARRAY[@]} / 2 )); i++))
	do
		temp_distro_available=1
		temp_distro_index=$(( $i + 3 ))

		# - Disable downgrades
		if (( $temp_distro_index < $G_DISTRO )); then

			G_DIETPI-NOTIFY 2 "Disabled Distro downgrade: index $temp_distro_index"
			temp_distro_available=0

		fi

		# - Enable option
		if (( $temp_distro_available )); then

			WHIP_MENU_ARRAY+=( "${DISTRO_LIST_ARRAY[$(( $i * 2 ))]}" "${DISTRO_LIST_ARRAY[$(( ($i * 2) + 1 ))]}" )

		fi

	done

	#delete []
	unset DISTRO_LIST_ARRAY

	if test -z $(WHIP_MENU_ARRAY+x) {

		G_DIETPI-NOTIFY 1 'Error: No available Distros for this system. Aborting...'
		exit 1

	}

	Run_Whiptail
	setglobal DISTRO_TARGET = $WHIP_RETURN_VALUE
	if sh-expr ' $DISTRO_TARGET == 3 ' {

		setglobal DISTRO_TARGET_NAME = ''jessie''

	} elif sh-expr ' $DISTRO_TARGET == 4 ' {

		setglobal DISTRO_TARGET_NAME = ''stretch''

	} elif sh-expr ' $DISTRO_TARGET == 5 ' {

		setglobal DISTRO_TARGET_NAME = ''buster''

	}


	#------------------------------------------------------------------------------------------------
	echo -e ''
	G_DIETPI-NOTIFY 2 '-----------------------------------------------------------------------------------'
	G_DIETPI-NOTIFY 0 'Step 4: APT configuration:'
	G_DIETPI-NOTIFY 2 '-----------------------------------------------------------------------------------'
	#------------------------------------------------------------------------------------------------

	G_DIETPI-NOTIFY 2 'Removing conflicting apt sources.list.d'
	#	NB: Apt sources will get overwritten during 1st run, via boot script and dietpi.txt entry

	#rm /etc/apt/sources.list.d/* &> /dev/null #Probably a bad idea
	rm /etc/apt/sources.list.d/deb-multimedia.list &> /dev/null #meveric
	#rm /etc/apt/sources.list.d/armbian.list

	G_DIETPI-NOTIFY 2 "Setting APT sources.list: $DISTRO_TARGET_NAME $DISTRO_TARGET"

	# - Set raspbian
	if sh-expr ' $G_HW_MODEL < 10 ' {

		cat << """ > /etc/apt/sources.list
deb https://www.mirrorservice.org/sites/archive.raspbian.org/raspbian $DISTRO_TARGET_NAME main contrib non-free rpi
"""
> /etc/apt/sources.list
deb https://www.mirrorservice.org/sites/archive.raspbian.org/raspbian $DISTRO_TARGET_NAME main contrib non-free rpi
_EOF_

		cat << """ > /etc/apt/sources.list.d/raspi.list
deb https://archive.raspberrypi.org/debian/ $DISTRO_TARGET_NAME main ui
"""
> /etc/apt/sources.list.d/raspi.list
deb https://archive.raspberrypi.org/debian/ $DISTRO_TARGET_NAME main ui
_EOF_

		# Reset raspo.list to max available distro Stretch, which at least worked on first tests with Buster."
		sh-expr ' $DISTRO_TARGET > 4 ' && sed -i "s/$DISTRO_TARGET_NAME/stretch/" /etc/apt/sources.list.d/raspi.list

	# - Set debian
	} else {

		cat << """ > /etc/apt/sources.list
deb https://deb.debian.org/debian/ $DISTRO_TARGET_NAME main contrib non-free
deb https://deb.debian.org/debian/ $DISTRO_TARGET_NAME-updates main contrib non-free
deb https://deb.debian.org/debian-security/ $DISTRO_TARGET_NAME/updates main contrib non-free
deb https://deb.debian.org/debian/ $DISTRO_TARGET_NAME-backports main contrib non-free
"""
> /etc/apt/sources.list
deb https://deb.debian.org/debian/ $DISTRO_TARGET_NAME main contrib non-free
deb https://deb.debian.org/debian/ $DISTRO_TARGET_NAME-updates main contrib non-free
deb https://deb.debian.org/debian-security/ $DISTRO_TARGET_NAME/updates main contrib non-free
deb https://deb.debian.org/debian/ $DISTRO_TARGET_NAME-backports main contrib non-free
_EOF_

		#	Jessie, switch deb.debian.org to http: https://github.com/Fourdee/DietPi/issues/1285#issuecomment-351830101
		if sh-expr ' $G_DISTRO < 4 ' {

			sed -i 's/https:/http:/g' /etc/apt/sources.list

		#	Buster, remove backports: https://github.com/Fourdee/DietPi/issues/1285#issuecomment-351830101
		} elif sh-expr ' $DISTRO_TARGET > 4 ' {

			sed -i '/backports/d' /etc/apt/sources.list

		}

	}

	G_DIETPI-NOTIFY 2 "Updating APT for $DISTRO_TARGET_NAME:"

	G_RUN_CMD apt-get clean

	G_AGUP

	# - @MichaIng https://github.com/Fourdee/DietPi/pull/1266/files
	G_DIETPI-NOTIFY 2 "Marking all packages as auto installed first, to allow effective autoremove afterwards"

	G_RUN_CMD apt-mark auto $[apt-mark showmanual]

	# - @MichaIng https://github.com/Fourdee/DietPi/pull/1266/files
	G_DIETPI-NOTIFY 2 "Temporary disable automatic recommends/suggests installation and allow them to be autoremoved:"

	export G_ERROR_HANDLER_COMMAND='/etc/apt/apt.conf.d/99-dietpi-norecommends'
	cat << """ > $G_ERROR_HANDLER_COMMAND
APT::Install-Recommends "false";
APT::Install-Suggests "false";
APT::AutoRemove::RecommendsImportant "false";
APT::AutoRemove::SuggestsImportant "false";
"""
> $G_ERROR_HANDLER_COMMAND
APT::Install-Recommends "false";
APT::Install-Suggests "false";
APT::AutoRemove::RecommendsImportant "false";
APT::AutoRemove::SuggestsImportant "false";
_EOF_
	export G_ERROR_HANDLER_EXITCODE=$Status
	G_ERROR_HANDLER

	G_DIETPI-NOTIFY 2 "Forcing use of modified apt configs"

	export G_ERROR_HANDLER_COMMAND='/etc/apt/apt.conf.d/99-dietpi-forceconf'
	cat << """ > $G_ERROR_HANDLER_COMMAND
Dpkg::options {
   "--force-confdef";
   "--force-confold";
}
"""
> $G_ERROR_HANDLER_COMMAND
Dpkg::options {
   "--force-confdef";
   "--force-confold";
}
_EOF_
	export G_ERROR_HANDLER_EXITCODE=$Status
	G_ERROR_HANDLER

	# - DietPi list of minimal required packages, which must be installed:
	setglobal aPACKAGES_REQUIRED_INSTALL = ''(

		'apt-transport-https'	# Allows https sources in ATP
		'apt-utils'		# Allows debconf to preconfigure APT packages before installing
		'bash-completion'	# Auto completes a wide list of bash commands
		'bc'			# Floating point calculation within bash
		'bzip2'			# .bz2 wrapper
		'ca-certificates'	# Adds known ca-certificates, necessary to practically access https sources
		'console-setup'		# DietPi-Config keyboard configuration
		'cron'			# background job scheduler
		'curl'			# Web address testing, downloading, uploading etc.
		'dbus'			# System message bus
		'debconf'		# APT package configuration, e.g. 'debconf-set-selections'
		'dosfstools' 		# DietPi-Drive_Manager + fat (boot) drive file system check
		'dphys-swapfile'	# Swap file management
		'ethtool'		# Ethernet link checking
		'fake-hwclock'		# Hardware clock emulation, to allow correct timestamps during boot before network time sync
		'fbset'			# DietPi-Config display settings
		'gnupg'			# apt-key add
		'hfsplus'		# DietPi-Drive_Manager NTS (MacOS) file system support
		'htop'			# System monitor
		'initramfs-tools'	# RAM file system initialization
		'iputils-ping'		# ping command
		'isc-dhcp-client'	# DHCP client
		'locales'		# Support locales, necessary for DietPi scripts, as we use enGB.UTF8 as default language
		'nano'			# Simple text editor
		'net-tools'		# DietPi-Boot: Network tools, ifconfig, route etc.
		'ntfs-3g'		# DietPi-Drive_Manager NTPS (Windows) file system support
		'ntp'			# Network time syncronization
		'p7zip-full'		# .7z wrapper
		'parted'		# DietPi-Boot + DietPi-Drive_Manager
		'psmisc'		# DietPi-Boot + DietPi-Software: e.g. killall
		'resolvconf'		# System name server updater
		'sudo'			# DietPi-Software + general use
		'systemd-sysv'		# Includes systemd and additional commands: poweroff, shutdown etc.
		'tzdata'		# Time zone data for system clock, auto summer/winter time adjustment
		'unzip'			# .zip unwrapper
		'usbutils'		# DietPi-Software + DietPi-Bugreport: e.g. lsusb
		'wget'			# download
		'whiptail'		# DietPi dialogs
		'wput'			# upload
		'zip'			# .zip wrapper

	)

	# - G_DISTRO specific required packages:
	if sh-expr ' $G_DISTRO < 4 ' {

		setglobal aPACKAGES_REQUIRED_INSTALL = ''('dropbear')		# DietPi default SSH-Client

	} else {

		setglobal aPACKAGES_REQUIRED_INSTALL = ''('dropbear-run')		# DietPi default SSH-Client (excluding initramfs integration, available since Stretch)

	}

	# - G_HW_MODEL specific required repo key packages
	#	Repo keys: https://github.com/Fourdee/DietPi/issues/1285#issuecomment-358301273
	if sh-expr ' $G_HW_MODEL >= 10 ' {

		G_AGI debian-archive-keyring

	} else {

		G_AGI raspbian-archive-keyring

	}

	# - G_HW_MODEL specific required packages:
	#	VM: No network firmware necessary and hard drive power management stays at host system.
	if sh-expr ' $G_HW_MODEL != 20 ' {

		G_AGI firmware-realtek					# Eth/WiFi/BT dongle firmware
		setglobal aPACKAGES_REQUIRED_INSTALL = ''('hdparm')			# Drive power management adjustment

	}

	# - Kernel required packages
	# - G_HW_ARCH specific required Kernel packages
	#	As these are kernel, firmware or bootloader packages, we need to install them directly to allow autoremove of in case older kernel packages:
	#	https://github.com/Fourdee/DietPi/issues/1285#issuecomment-354602594
	#	x86_64
	if sh-expr ' $G_HW_ARCH == 10 ' {

		G_AGI linux-image-amd64
		# Usually no firmware should be necessary for VMs. If user manually passes though some USB device, he might need to install the firmware then.
		sh-expr ' $G_HW_MODEL != 20 ' && G_AGI firmware-linux-nonfree
		grep 'vendor_id' /proc/cpuinfo | grep -qi 'intel' && G_AGI intel-microcode
		grep 'vendor_id' /proc/cpuinfo | grep -qi 'amd' && G_AGI amd64-microcode
		#aPACKAGES_REQUIRED_INSTALL+=('firmware-misc-nonfree')
		#aPACKAGES_REQUIRED_INSTALL+=('dmidecode')

		#	Grub EFI
		if sh-expr ' $(dpkg --get-selections | grep -ci -m1 '^grub-efi-amd64[[:space:]]') ' ||
			test -d /boot/efi {

			G_AGI grub-efi-amd64

		#	Grub BIOS
		} else {

			G_AGI grub-pc

		}

	# - G_HW_MODEL specific required Kernel packages
	#	RPi
	} elif sh-expr ' $G_HW_MODEL < 10 ' {

		apt-mark unhold libraspberrypi-bin libraspberrypi0 raspberrypi-bootloader raspberrypi-kernel raspberrypi-sys-mods raspi-copies-and-fills
		rm -R /lib/modules/*

		G_AGI libraspberrypi-bin libraspberrypi0 raspberrypi-bootloader raspberrypi-kernel raspberrypi-sys-mods raspi-copies-and-fills --reinstall

	#	Odroid C2
	} elif sh-expr ' $G_HW_MODEL == 12 ' {

		G_AGI linux-image-arm64-odroid-c2

	#	Odroid XU3/4/HC1
	} elif sh-expr ' $G_HW_MODEL == 11 ' {

		#G_AGI linux-image-4.9-armhf-odroid-xu3
		G_AGI $[dpkg --get-selections | grep '^linux-image' | awk '{print $1}]
		sh-expr ' $(dpkg --get-selections | grep -ci -m1 '^linux-image') ' || G_AGI linux-image-armhf-odroid-xu3

	#	Odroid C1
	} elif sh-expr ' $G_HW_MODEL == 10 ' {

		G_AGI linux-image-armhf-odroid-c1

	#	Rock64
	} elif sh-expr ' $G_HW_MODEL == 43 ' {

		G_AGI linux-rock64-package

	#	BBB
	} elif sh-expr ' $G_HW_MODEL == 71 ' {

		G_AGI device-tree-compiler #Kern


	# - Auto detect kernel/firmware package
	} else {

		setglobal AUTO_DETECT_KERN_PKG = $[dpkg --get-selections | grep '^linux-image' | awk '{print $1}]
		if test -n $AUTO_DETECT_KERN_PKG {

			G_AGI $AUTO_DETECT_KERN_PKG

		} else {

			G_DIETPI-NOTIFY 2 'Unable to find kernel packages for installation. Assuming non-APT/.deb kernel installation.'

		}

		#ARMbian/others DTB
		setglobal AUTO_DETECT_DTB_PKG = $[dpkg --get-selections | grep '^linux-dtb-' | awk '{print $1}]
		if test -n $AUTO_DETECT_DTB_PKG {

			G_AGI $AUTO_DETECT_DTB_PKG

		}

		#	Check for existing firmware
		#	- ARMbian
		# AUTO_DETECT_FIRMWARE_PKG=$(dpkg --get-selections | grep '^armbian-firmware' | awk '{print $1}')
		# if [ -n "$AUTO_DETECT_FIRMWARE_PKG" ]; then

			# G_AGI $AUTO_DETECT_FIRMWARE_PKG

		# fi
			# Unpacking armbian-firmware (5.35) ...
			# dpkg: error processing archive /var/cache/apt/archives/armbian-firmware_5.35_all      .deb (--unpack):
			# trying to overwrite '/lib/firmware/rt2870.bin', which is also in package firmwa      re-misc-nonfree 20161130-3
			# dpkg-deb: error: subprocess paste was killed by signal (Broken pipe)


	}

	G_DIETPI-NOTIFY 2 "WiFi selection"

	setglobal WHIP_TITLE = ''WiFi required?''
	setglobal WHIP_DESC = ''Please select an option''
	setglobal WHIP_DEFAULT_ITEM = '1'
	setglobal WHIP_MENU_ARRAY = ''(

		'0' "I don't require WiFi, do not install."
		'1' 'I require WiFi functionality, keep/install related packages.'

	)

	Run_Whiptail
	if sh-expr ' $WHIP_RETURN_VALUE == 1 ' {

		G_DIETPI-NOTIFY 2 "Marking WiFi as needed"

		setglobal aPACKAGES_REQUIRED_INSTALL = ''('crda')			# WiFi related
		setglobal aPACKAGES_REQUIRED_INSTALL = ''('firmware-atheros')	# WiFi dongle firmware
		setglobal aPACKAGES_REQUIRED_INSTALL = ''('firmware-brcm80211')	# WiFi dongle firmware
		setglobal aPACKAGES_REQUIRED_INSTALL = ''('firmware-ralink')		# WiFi dongle firmware
		setglobal aPACKAGES_REQUIRED_INSTALL = ''('iw')			# WiFi related
		setglobal aPACKAGES_REQUIRED_INSTALL = ''('rfkill')	 		# WiFi related: Used by some onboard WiFi chipsets
		setglobal aPACKAGES_REQUIRED_INSTALL = ''('wireless-tools')		# WiFi related
		setglobal aPACKAGES_REQUIRED_INSTALL = ''('wpasupplicant')		# WiFi related

	}

	G_DIETPI-NOTIFY 2 "Generating list of minimal packages, required for DietPi installation:"

	setglobal INSTALL_PACKAGES = ''''
	for ((i=0; i<${#aPACKAGES_REQUIRED_INSTALL[@]}; i++))
	do

		#	One line INSTALL_PACKAGES so we can use it later.
		INSTALL_PACKAGES+="${aPACKAGES_REQUIRED_INSTALL[$i]} "

	done

	# - delete[]
	unset aPACKAGES_REQUIRED_INSTALL

	G_DIETPI-NOTIFY 2 "Marking required packages as manually installed:"

	G_RUN_CMD apt-mark manual $INSTALL_PACKAGES

	G_DIETPI-NOTIFY 2 "Purging APT with autoremoval:"

	G_AGA


	#------------------------------------------------------------------------------------------------
	echo -e ''
	G_DIETPI-NOTIFY 2 '-----------------------------------------------------------------------------------'
	G_DIETPI-NOTIFY 0 'Step 5: APT installations:'
	G_DIETPI-NOTIFY 2 '-----------------------------------------------------------------------------------'
	#------------------------------------------------------------------------------------------------

	G_DIETPI-NOTIFY 2 "Upgrading existing APT installed packages:"

	G_AGDUG

	# - Distro is now target (for APT purposes and G_AGX support due to installed binary, its here, instead of after G_AGUP)
	setglobal G_DISTRO = $DISTRO_TARGET
	setglobal G_DISTRO_NAME = $DISTRO_TARGET_NAME

	G_DIETPI-NOTIFY 2 "Disabling swapfile generation for dphys-swapfile during install"

	G_RUN_CMD echo -e "CONF_SWAPSIZE=0" > /etc/dphys-swapfile

	G_DIETPI-NOTIFY 2 "Installing core DietPi pre-req APT packages"

	G_AGI $INSTALL_PACKAGES

	# - @MichaIng https://github.com/Fourdee/DietPi/pull/1266/files
	G_DIETPI-NOTIFY 2 "Returning installation of recommends back to default"

	G_RUN_CMD rm /etc/apt/apt.conf.d/99-dietpi-norecommends

	G_DIETPI-NOTIFY 2 "Purging APT with autoremoval (in case of DISTRO upgrade/downgrade):"

	G_AGA

	# Reenable HTTPS for deb.debian.org, if system was dist-upgraded to Stretch+
	if sh-expr ' $G_DISTRO > 3 && $G_HW_MODEL > 9 ' {

		sed -i 's/http:/https:/g' /etc/apt/sources.list

	}

	#------------------------------------------------------------------------------------------------
	echo -e ''
	G_DIETPI-NOTIFY 2 '-----------------------------------------------------------------------------------'
	G_DIETPI-NOTIFY 0 'Step 6: Downloading and installing DietPi sourcecode'
	G_DIETPI-NOTIFY 2 '-----------------------------------------------------------------------------------'
	#------------------------------------------------------------------------------------------------

	setglobal INTERNET_ADDRESS = ""https://github.com/Fourdee/DietPi/archive/$GIT_BRANCH.zip"" #NB: testing until this is stable in master
	G_DIETPI-NOTIFY 2 "Checking connection to $INTERNET_ADDRESS"
	G_CHECK_URL $INTERNET_ADDRESS

	G_RUN_CMD wget $INTERNET_ADDRESS -O package.zip

	G_DIETPI-NOTIFY 2 "Extracting DietPi sourcecode"

	G_RUN_CMD unzip -o package.zip

	rm package.zip

	G_DIETPI-NOTIFY 2 "Removing files not required"

	#	Remove files we do not require, or want to overwrite in /boot
	rm DietPi-*/CHANGELOG.txt
	rm DietPi-*/PREP_SYSTEM_FOR_DIETPI.sh
	rm DietPi-*/TESTING-BRANCH.md
	rm DietPi-*/uEnv.txt # Pine 64, use existing on system.

	G_DIETPI-NOTIFY 2 "Creating /boot"

	G_RUN_CMD mkdir -p /boot

	G_DIETPI-NOTIFY 2 "Moving to /boot"

	# - HW specific boot.ini uEnv.txt
	if sh-expr ' $G_HW_MODEL == 10 ' {

		G_RUN_CMD mv DietPi-*/boot_c1.ini /boot/boot.ini

	} elif sh-expr ' $G_HW_MODEL == 11 ' {

		G_RUN_CMD mv DietPi-*/boot_xu4.ini /boot/boot.ini

	} elif sh-expr ' $G_HW_MODEL == 12 ' {

		G_RUN_CMD mv DietPi-*/boot_c2.ini /boot/boot.ini

	}
	rm DietPi-*/*.ini

	G_RUN_CMD cp -R DietPi-*/* /boot/

	G_DIETPI-NOTIFY 2 "Cleaning up extracted files"

	G_RUN_CMD rm -R DietPi-*

	G_DIETPI-NOTIFY 2 "Setting execute permissions for /boot/dietpi"

	G_RUN_CMD chmod -R +x /boot/dietpi

	#------------------------------------------------------------------------------------------------
	echo -e ''
	G_DIETPI-NOTIFY 2 '-----------------------------------------------------------------------------------'
	G_DIETPI-NOTIFY 0 "Step 7: Prep system for DietPi ENV:"
	G_DIETPI-NOTIFY 2 '-----------------------------------------------------------------------------------'
	#------------------------------------------------------------------------------------------------

	G_DIETPI-NOTIFY 2 "Deleting list of known users, not required by DietPi"

	userdel -f pi &> /dev/null
	userdel -f test &> /dev/null #armbian
	userdel -f odroid &> /dev/null
	userdel -f rock64 &> /dev/null
	userdel -f linaro &> /dev/null #ASUS TB
	userdel -f dietpi &> /dev/null
	userdel -f debian &> /dev/null #BBB

	G_DIETPI-NOTIFY 2 "Removing misc files/folders/services, not required by DietPi"

	rm -R /home &> /dev/null
	rm -R /media &> /dev/null
	rm -R /selinux &> /dev/null

	# - www
	rm -R /var/www/* &> /dev/null

	# - sourcecode (linux-headers etc)
	rm -R /usr/src/* &> /dev/null

	# - root
	rm -R /root/.cache/* &> /dev/null
	rm -R /root/.local/* &> /dev/null
	rm -R /root/.config/* &> /dev/null

	# - documentation folders
	rm -R /usr/share/man &> /dev/null
	rm -R /usr/share/doc &> /dev/null
	rm -R /usr/share/doc-base &> /dev/null
	rm -R /usr/share/calendar &> /dev/null

	# - Previous debconfs
	rm /var/cache/debconf/*-old &> /dev/null

	# - Fonts
	rm -R /usr/share/fonts/* &> /dev/null
	rm -R /usr/share/icons/* &> /dev/null

	rm /etc/init.d/resize2fs &> /dev/null
	rm /etc/update-motd.d/* &> /dev/null # ARMbian

	systemctl disable firstrun  &> /dev/null
	rm /etc/init.d/firstrun  &> /dev/null # ARMbian

	# - Disable ARMbian's log2ram: https://github.com/Fourdee/DietPi/issues/781
	systemctl disable log2ram.service &> /dev/null
	systemctl stop log2ram.service &> /dev/null
	rm /usr/local/sbin/log2ram &> /dev/null
	rm /etc/systemd/system/log2ram.service &> /dev/null
	systemctl daemon-reload &> /dev/null
	rm /etc/cron.hourly/log2ram &> /dev/null

	rm /etc/init.d/cpu_governor &> /dev/null# Meveric&> /dev/null# Meveric
	rm /etc/systemd/system/cpu_governor.service &> /dev/null# Meveric&> /dev/null# Meveric

	# - Disable ARMbian's resize service (not automatically removed by ARMbian scripts...)
	systemctl disable resize2fs &> /dev/null
	rm /etc/systemd/system/resize2fs.service &> /dev/null

	# - ARMbian-config
	rm /etc/profile.d/check_first_login_reboot.sh &> /dev/null

	G_DIETPI-NOTIFY 2 "Creating DietPi core environment"

	G_RUN_CMD /boot/dietpi/func/dietpi-set_core_environment

	echo -e "Samba client can be installed and setup by DietPi-Config.\nSimply run: dietpi-config and select the Networking option: NAS/Misc menu" > /mnt/samba/readme.txt
	echo -e "FTP client mount can be installed and setup by DietPi-Config.\nSimply run: dietpi-config and select the Networking option: NAS/Misc menu" > /mnt/ftp_client/readme.txt
	echo -e "NFS client can be installed and setup by DietPi-Config.\nSimply run: dietpi-config and select the Networking option: NAS/Misc menu" > /mnt/nfs_client/readme.txt

	G_DIETPI-NOTIFY 2 "Deleting all log files /var/log"

	/boot/dietpi/dietpi-logclear 2 &> /dev/null # As this will report missing vars, however, its fine, does not break functionality.

	G_DIETPI-NOTIFY 2 "Generating DietPi /etc/fstab"

	G_RUN_CMD /boot/dietpi/dietpi-drive_manager 4

	# - HW Specific:
	#	RPi requires PARTUUID for USB write: https://github.com/Fourdee/DietPi/issues/970
	if sh-expr ' $G_HW_MODEL < 10 ' {

		setglobal PARTUUID_CURRENT = $[blkid /dev/mmcblk0p1 -s PARTUUID -o value]
		setglobal UUID_CURRENT = $[blkid /dev/mmcblk0p1 -s UUID -o value]
		sed -i "s#^UUID=$UUID_CURRENT#PARTUUID=$PARTUUID_CURRENT#g" /etc/fstab

		setglobal PARTUUID_CURRENT = $[blkid /dev/mmcblk0p2 -s PARTUUID -o value]
		setglobal UUID_CURRENT = $[blkid /dev/mmcblk0p2 -s UUID -o value]
		sed -i "s#^UUID=$UUID_CURRENT#PARTUUID=$PARTUUID_CURRENT#g" /etc/fstab

		systemctl daemon-reload

	}

	G_DIETPI-NOTIFY 2 "Starting DietPi-RAMdisk service"

	G_RUN_CMD systemctl start dietpi-ramdisk.service

	G_DIETPI-NOTIFY 2 "Starting DietPi-RAMlog service"

	G_RUN_CMD systemctl start dietpi-ramlog.service

	G_DIETPI-NOTIFY 2 'Updating DietPi HW_INFO'

	/DietPi/dietpi/dietpi-obtain_hw_model

	G_DIETPI-NOTIFY 2 "Configuring Network:"

	rm -R /etc/network/interfaces &> /dev/null # armbian symlink for bulky network-manager

	G_RUN_CMD cp /boot/dietpi/conf/network_interfaces /etc/network/interfaces

	# - Remove all predefined eth*/wlan* adapter rules
	rm /etc/udev/rules.d/70-persistent-net.rules &> /dev/null
	rm /etc/udev/rules.d/70-persistant-net.rules &> /dev/null

	# - Add pre-up lines for wifi on OrangePi Zero
	if sh-expr ' $G_HW_MODEL == 32 ' {

		sed -i '/iface wlan0 inet dhcp/apre-up modprobe xradio_wlan\npre-up iwconfig wlan0 power on' /etc/network/interfaces

	}

	G_DIETPI-NOTIFY 2 "Tweaking DHCP timeout:"

	# - Reduce DHCP request retry count and timeouts: https://github.com/Fourdee/DietPi/issues/711
	sed -i '/^#timeout /d' /etc/dhcp/dhclient.conf
	sed -i '/^#retry /d' /etc/dhcp/dhclient.conf
	sed -i '/^timeout /d' /etc/dhcp/dhclient.conf
	sed -i '/^retry /d' /etc/dhcp/dhclient.conf
	cat << """ >> /etc/dhcp/dhclient.conf
timeout 10;
retry 4;
"""
>> /etc/dhcp/dhclient.conf
timeout 10;
retry 4;
_EOF_

	G_DIETPI-NOTIFY 2 "Configuring hosts:"

	export G_ERROR_HANDLER_COMMAND='/etc/hosts'
	cat << """ > $G_ERROR_HANDLER_COMMAND
127.0.0.1    localhost
127.0.1.1    DietPi
::1          localhost ip6-localhost ip6-loopback
ff02::1      ip6-allnodes
ff02::2      ip6-allrouters
"""
> $G_ERROR_HANDLER_COMMAND
127.0.0.1    localhost
127.0.1.1    DietPi
::1          localhost ip6-localhost ip6-loopback
ff02::1      ip6-allnodes
ff02::2      ip6-allrouters
_EOF_
	export G_ERROR_HANDLER_EXITCODE=$Status
	G_ERROR_HANDLER

	export G_ERROR_HANDLER_COMMAND='/etc/hostname'
	cat << """ > $G_ERROR_HANDLER_COMMAND
DietPi
"""
> $G_ERROR_HANDLER_COMMAND
DietPi
_EOF_
	export G_ERROR_HANDLER_EXITCODE=$Status
	G_ERROR_HANDLER

	G_DIETPI-NOTIFY 2 "Configuring htop:"

	mkdir -p /root/.config/htop
	cp /DietPi/dietpi/conf/htoprc /root/.config/htop/htoprc

	G_DIETPI-NOTIFY 2 "Configuring hdparm:"

	export G_ERROR_HANDLER_COMMAND='/etc/hdparm.conf'
	cat << """ >> $G_ERROR_HANDLER_COMMAND

#DietPi external USB drive. Power management settings.
/dev/sda {
        #10 mins
        spindown_time = 120

        #
        apm = 254
}
"""
>> $G_ERROR_HANDLER_COMMAND

#DietPi external USB drive. Power management settings.
/dev/sda {
        #10 mins
        spindown_time = 120

        #
        apm = 254
}
_EOF_
	export G_ERROR_HANDLER_EXITCODE=$Status
	G_ERROR_HANDLER

	G_DIETPI-NOTIFY 2 "Configuring fakehwclock:"

	# - allow times in the past
	sed -i "/FORCE=/c\FORCE=force" /etc/default/fake-hwclock

	G_DIETPI-NOTIFY 2 "Configuring serial consoles:"

	# - Disable serial console
	/DietPi/dietpi/func/dietpi-set_hardware serialconsole disable

	G_DIETPI-NOTIFY 2 "Configuring ntpd:"

	systemctl disable systemd-timesyncd
	rm /etc/init.d/ntp &> /dev/null
	sh-expr ' $G_DISTRO > 4 ' && systemctl mask ntp

	G_DIETPI-NOTIFY 2 "Configuring regional settings (TZdata):"

	rm /etc/timezone &> /dev/null
	rm /etc/localtime
	ln -fs /usr/share/zoneinfo/Europe/London /etc/localtime
	G_RUN_CMD dpkg-reconfigure -f noninteractive tzdata

	G_DIETPI-NOTIFY 2 "Configuring regional settings (Keyboard):"

	dpkg-reconfigure -f noninteractive keyboard-configuration #Keyboard must be plugged in for this to work!

	#G_DIETPI-NOTIFY 2 "Configuring regional settings (Locale):"

	#Runs at start of script

	#G_HW_ARCH specific
	G_DIETPI-NOTIFY 2 "Applying G_HW_ARCH specific tweaks:"

	if sh-expr ' $G_HW_ARCH == 10 ' {

		# - i386 APT support
		dpkg --add-architecture i386
		G_AGUP

		# - Disable nouveau: https://github.com/Fourdee/DietPi/issues/1244 // http://dietpi.com/phpbb/viewtopic.php?f=11&t=2462&p=9688#p9688
		cat << """ > /etc/modprobe.d/blacklist-nouveau.conf
blacklist nouveau
blacklist lbm-nouveau
options nouveau modeset=0
alias nouveau off
alias lbm-nouveau off
"""
> /etc/modprobe.d/blacklist-nouveau.conf
blacklist nouveau
blacklist lbm-nouveau
options nouveau modeset=0
alias nouveau off
alias lbm-nouveau off
_EOF_
		echo -e "options nouveau modeset=0" > /etc/modprobe.d/nouveau-kms.conf
		update-initramfs -u

	}

	#G_HW_MODEL specific
	G_DIETPI-NOTIFY 2 "Appling G_HW_MODEL specific tweaks:"

	# - ARMbian OPi Zero 2: https://github.com/Fourdee/DietPi/issues/876#issuecomment-294350580
	if sh-expr ' $G_HW_MODEL == 35 ' {

		echo -e "blacklist bmp085" > /etc/modprobe.d/bmp085.conf

	# - Sparky SBC ONLY:
	} elif sh-expr ' $G_HW_MODEL == 70 ' {

		# 	Install latest kernel
		wget https://raw.githubusercontent.com/sparky-sbc/sparky-test/master/dragon_fly_check/uImage -O /boot/uImage
		wget https://raw.githubusercontent.com/sparky-sbc/sparky-test/master/dragon_fly_check/3.10.38.bz2 -O package.tar
		tar xvf package.tar -C /lib/modules/
		rm package.tar

		cat << """ > /DietPi/uEnv.txt
uenvcmd=setenv os_type linux;
bootargs=earlyprintk clk_ignore_unused selinux=0 scandelay console=tty0 loglevel=1 real_rootflag=rw root=/dev/mmcblk0p2 rootwait init=/lib/systemd/systemd aotg.urb_fix=1 aotg.aotg1_speed=0
"""
> /DietPi/uEnv.txt
uenvcmd=setenv os_type linux;
bootargs=earlyprintk clk_ignore_unused selinux=0 scandelay console=tty0 loglevel=1 real_rootflag=rw root=/dev/mmcblk0p2 rootwait init=/lib/systemd/systemd aotg.urb_fix=1 aotg.aotg1_speed=0
_EOF_

		#	Blacklist GPU and touch screen modules: https://github.com/Fourdee/DietPi/issues/699#issuecomment-271362441
		cat << """ > /etc/modprobe.d/disable_sparkysbc_touchscreen.conf
blacklist owl_camera
blacklist gsensor_stk8313
blacklist ctp_ft5x06
blacklist ctp_gsl3680
blacklist gsensor_bma222
blacklist gsensor_mir3da
"""
> /etc/modprobe.d/disable_sparkysbc_touchscreen.conf
blacklist owl_camera
blacklist gsensor_stk8313
blacklist ctp_ft5x06
blacklist ctp_gsl3680
blacklist gsensor_bma222
blacklist gsensor_mir3da
_EOF_

		cat << """ > /etc/modprobe.d/disable_sparkysbc_gpu.conf
blacklist pvrsrvkm
blacklist drm
blacklist videobuf2_vmalloc
blacklist bc_example
"""
> /etc/modprobe.d/disable_sparkysbc_gpu.conf
blacklist pvrsrvkm
blacklist drm
blacklist videobuf2_vmalloc
blacklist bc_example
_EOF_

		#	Use performance gov for stability.
		sed -i "/^CONFIG_CPU_GOVERNOR=/c\CONFIG_CPU_GOVERNOR=performance" /DietPi/dietpi.txt
		/DietPi/dietpi/dietpi-cpu_set

	# - RPI: Scroll lock fix for RPi by Midwan: https://github.com/Fourdee/DietPi/issues/474#issuecomment-243215674
	} elif sh-expr ' $G_HW_MODEL < 10 ' {

		cat << """ > /etc/udev/rules.d/50-leds.rules
ACTION=="add", SUBSYSTEM=="leds", ENV{DEVPATH}=="*/input*::scrolllock", ATTR{trigger}="kbd-scrollock"
"""
> /etc/udev/rules.d/50-leds.rules
ACTION=="add", SUBSYSTEM=="leds", ENV{DEVPATH}=="*/input*::scrolllock", ATTR{trigger}="kbd-scrollock"
_EOF_

	# - PINE64 (and possibily others): Cursor fix for FB
	} elif sh-expr ' $G_HW_MODEL == 40 ' {

		cat << """ >> "$HOME"/.bashrc
infocmp > terminfo.txt
sed -i -e 's/?0c/?112c/g' -e 's/?8c/?48;0;64c/g' terminfo.txt
tic terminfo.txt
tput cnorm
"""
>> "$HOME"/.bashrc
infocmp > terminfo.txt
sed -i -e 's/?0c/?112c/g' -e 's/?8c/?48;0;64c/g' terminfo.txt
tic terminfo.txt
tput cnorm
_EOF_

	# - XU4 FFMPEG fix. Prefer debian.org over Meveric for backports: https://github.com/Fourdee/DietPi/issues/1273
	} elif sh-expr ' $G_HW_MODEL == 11 ' {

		cat << """ > /etc/apt/preferences.d/backports
Package: *
Pin: release a=jessie-backports
Pin: origin "fuzon.co.uk"
Pin-Priority: 99
"""
> /etc/apt/preferences.d/backports
Package: *
Pin: release a=jessie-backports
Pin: origin "fuzon.co.uk"
Pin-Priority: 99
_EOF_

	}

	# - ARMbian increase console verbose
	sed -i '/verbosity=/c\verbosity=7' /boot/armbianEnv.txt &> /dev/null


	#------------------------------------------------------------------------------------------------
	echo -e ''
	G_DIETPI-NOTIFY 2 '-----------------------------------------------------------------------------------'
	G_DIETPI-NOTIFY 0 "Step 8: Finalise system for first run of DietPi:"
	G_DIETPI-NOTIFY 2 '-----------------------------------------------------------------------------------'
	#------------------------------------------------------------------------------------------------

	G_DIETPI-NOTIFY 2 'Configuring Dropbear:'

	#	set to start on next boot
	sed -i '/NO_START=1/c\NO_START=0' /etc/default/dropbear

	G_DIETPI-NOTIFY 2 'Configuring Services'

	/DietPi/dietpi/dietpi-services stop
	/DietPi/dietpi/dietpi-services dietpi_controlled

	G_DIETPI-NOTIFY 2 'Running general cleanup of misc files'

	# - general folders
	rm -R /tmp/* &> /dev/null

	# - Remove Bash History file
	rm ~/.bash_history &> /dev/null

	# - Nano histroy file
	rm ~/.nano_history &> /dev/null

	G_DIETPI-NOTIFY 2 'Disabling swapfile'

	/DietPi/dietpi/func/dietpi-set_dphys-swapfile 0 /var/swap
	rm /var/swap &> /dev/null # still exists on some images...

	#	BBB disable swapfile gen
	if sh-expr ' $G_HW_MODEL == 71 ' {

		sed -i '/AUTO_SETUP_SWAPFILE_SIZE=/c\AUTO_SETUP_SWAPFILE_SIZE=0' /DietPi/dietpi.txt

	}

	G_DIETPI-NOTIFY 2 'Resetting boot.ini, config.txt, cmdline.txt etc'

	# - PineA64 - delete ethaddr from uEnv.txt file
	if sh-expr ' $G_HW_MODEL == 40 ' {

		sed -i '/^ethaddr/ d' /boot/uEnv.txt

	}

	# - Set Pi cmdline.txt back to normal
	test -f /boot/cmdline.txt && sed -i "s/ rootdelay=10//g" /boot/cmdline.txt

	G_DIETPI-NOTIFY 2 'Generating default wpa_supplicant.conf'

	/DietPi/dietpi/func/dietpi-set_hardware wificreds set

	G_DIETPI-NOTIFY 2 'Disabling generic WiFi/BT by default'

	/DietPi/dietpi/func/dietpi-set_hardware bluetooth disable
	/DietPi/dietpi/func/dietpi-set_hardware wifimodules disable

	G_DIETPI-NOTIFY 2 'Enabling onboard WiFi modules by default'

	/DietPi/dietpi/func/dietpi-set_hardware wifimodules onboard_enable

	#G_DIETPI-NOTIFY 2 'Configuring IP version preferences'

	#/DietPi/dietpi/func/dietpi-set_hardware preferipversion ipv4 #Already done at top of script, and now default in dietpi.txt

	G_DIETPI-NOTIFY 2 'Disabling soundcards by default'

	/DietPi/dietpi/func/dietpi-set_hardware soundcard none
	#	Alsa-utils is auto installed to reset soundcard settings on some ARM devices. uninstall it afterwards
	G_AGP alsa-utils
	G_AGA

	G_DIETPI-NOTIFY 2 'Setting default CPU gov'

	/DietPi/dietpi/dietpi-cpu_set

	G_DIETPI-NOTIFY 2 'Clearing log files'

	/DietPi/dietpi/dietpi-logclear 2

	G_DIETPI-NOTIFY 2 'Deleting DietPi-RAMlog storage'

	rm -R /var/lib/dietpi/dietpi-ramlog/storage/* &> /dev/null

	G_DIETPI-NOTIFY 2 'Deleting NTP drift file'

	rm /var/lib/ntp/ntp.drift &> /dev/null

	G_DIETPI-NOTIFY 2 'Resetting DietPi generated globals/files'

	rm /DietPi/dietpi/.??*

	G_DIETPI-NOTIFY 2 'Setting DietPi-Autostart to console'

	echo 0 > /DietPi/dietpi/.dietpi-autostart_index

	G_DIETPI-NOTIFY 2 'Creating our update file (used on 1st run to check for DietPi updates)'

	echo -1 > /DietPi/dietpi/.update_stage

	G_DIETPI-NOTIFY 2 'Set Init .install_stage to -1 (first boot)'

	echo -1 > /DietPi/dietpi/.install_stage

	G_DIETPI-NOTIFY 2 'Remove server_version / patch_file (downloads fresh from dietpi-update)'

	rm /DietPi/dietpi/patch_file &> /dev/null
	rm /DietPi/dietpi/server_version* &> /dev/null

	G_DIETPI-NOTIFY 2 'Clearing APT cache'

	G_RUN_CMD apt-get clean
	rm -R /var/lib/apt/lists/* -vf #lists cache: remove partial folder also, automatically gets regenerated on G_AGUP
	#rm /var/lib/dpkg/info/* #issue...
	#dpkg: warning: files list file for package 'libdbus-1-3:armhf' missing; assuming      package has no files currently installed

	# - HW Specific
	#	RPi remove saved G_HW_MODEL , allowing obtain-hw_model to auto detect RPi model
	if sh-expr ' $G_HW_MODEL < 10 ' {

		rm /etc/.dietpi_hw_model_identifier

	}

	G_DIETPI-NOTIFY 2 'Generating dietpi-fs_partition_resize for first boot'

	#??? BBB skip this???
	cat << """ > /etc/systemd/system/dietpi-fs_partition_resize.service
[Unit]
Description=dietpi-fs_partition_resize
Before=dietpi-ramdisk.service

[Service]
Type=oneshot
RemainAfterExit=no
ExecStart=/bin/bash -c '/var/lib/dietpi/fs_partition_resize.sh | tee /var/tmp/dietpi/logs/fs_partition_resize.log'
StandardOutput=tty

[Install]
WantedBy=local-fs.target
"""
> /etc/systemd/system/dietpi-fs_partition_resize.service
[Unit]
Description=dietpi-fs_partition_resize
Before=dietpi-ramdisk.service

[Service]
Type=oneshot
RemainAfterExit=no
ExecStart=/bin/bash -c '/var/lib/dietpi/fs_partition_resize.sh | tee /var/tmp/dietpi/logs/fs_partition_resize.log'
StandardOutput=tty

[Install]
WantedBy=local-fs.target
_EOF_
	systemctl daemon-reload
	G_RUN_CMD systemctl enable dietpi-fs_partition_resize.service

	cat << """ > /var/lib/dietpi/fs_partition_resize.sh
#!/bin/bash

systemctl disable dietpi-fs_partition_resize.service
systemctl enable dietpi-fs_expand.service
systemctl daemon-reload

sync

TARGET_PARTITION=0
TARGET_DEV='$'(findmnt / -o source -n)

# - MMCBLK[0-9]p[0-9] scrape
if [[ "'$'TARGET_DEV" = *"mmcblk"* ]]; then

    TARGET_DEV='$'(findmnt / -o source -n | sed 's/p[0-9]'$'//')
	TARGET_PARTITION='$'(findmnt / -o source -n | sed 's/.*p//')

# - Everything else scrape (eg: /dev/sdX[0-9])
else

    TARGET_DEV='$'(findmnt / -o source -n | sed 's/[0-9]'$'//')
	TARGET_PARTITION='$'(findmnt / -o source -n | sed 's|/dev/sd.||')

fi

cat << _EOF_1 | fdisk '$'TARGET_DEV
p
d
'$'TARGET_PARTITION
n
p
'$'TARGET_PARTITION
'$'(parted '$'TARGET_DEV -ms unit s p | grep ':ext4::;' | sed 's/:/ /g' | sed 's/s//g' | awk '{ print '$'2 }')

p
w

_EOF_1

reboot

"""
> /var/lib/dietpi/fs_partition_resize.sh
#!/bin/bash

systemctl disable dietpi-fs_partition_resize.service
systemctl enable dietpi-fs_expand.service
systemctl daemon-reload

sync

TARGET_PARTITION=0
TARGET_DEV=\$(findmnt / -o source -n)

# - MMCBLK[0-9]p[0-9] scrape
if [[ "\$TARGET_DEV" = *"mmcblk"* ]]; then

    TARGET_DEV=\$(findmnt / -o source -n | sed 's/p[0-9]\$//')
	TARGET_PARTITION=\$(findmnt / -o source -n | sed 's/.*p//')

# - Everything else scrape (eg: /dev/sdX[0-9])
else

    TARGET_DEV=\$(findmnt / -o source -n | sed 's/[0-9]\$//')
	TARGET_PARTITION=\$(findmnt / -o source -n | sed 's|/dev/sd.||')

fi

cat << _EOF_1 | fdisk \$TARGET_DEV
p
d
\$TARGET_PARTITION
n
p
\$TARGET_PARTITION
\$(parted \$TARGET_DEV -ms unit s p | grep ':ext4::;' | sed 's/:/ /g' | sed 's/s//g' | awk '{ print \$2 }')

p
w

_EOF_1

reboot

_EOF_
	G_RUN_CMD chmod +x /var/lib/dietpi/fs_partition_resize.sh

	G_DIETPI-NOTIFY 2 'Generating dietpi-fs_partition_expand for subsequent boot'

	cat << """ > /etc/systemd/system/dietpi-fs_expand.service
[Unit]
Description=dietpi-fs_expand
Before=dietpi-ramdisk.service

[Service]
Type=oneshot
RemainAfterExit=no
ExecStart=/bin/bash -c "resize2fs '$'(findmnt / -o source -n) &> /var/tmp/dietpi/logs/fs_expand.log; systemctl disable dietpi-fs_expand.service; systemctl daemon-reload"
StandardOutput=tty

[Install]
WantedBy=local-fs.target
"""
> /etc/systemd/system/dietpi-fs_expand.service
[Unit]
Description=dietpi-fs_expand
Before=dietpi-ramdisk.service

[Service]
Type=oneshot
RemainAfterExit=no
ExecStart=/bin/bash -c "resize2fs \$(findmnt / -o source -n) &> /var/tmp/dietpi/logs/fs_expand.log; systemctl disable dietpi-fs_expand.service; systemctl daemon-reload"
StandardOutput=tty

[Install]
WantedBy=local-fs.target
_EOF_
	systemctl daemon-reload

	# #debug
	# systemctl start dietpi-fs_partition_resize.service
	# systemctl status dietpi-fs_partition_resize.service -l
	# cat /var/tmp/dietpi/logs/fs_partition_resize.log

	G_DIETPI-NOTIFY 2 'Storing DietPi version ID'

	G_RUN_CMD wget https://raw.githubusercontent.com/Fourdee/DietPi/$GIT_BRANCH/dietpi/.version -O /DietPi/dietpi/.version

	#	reduce sub_version by 1, allows us to create image, prior to release and patch if needed.
	setglobal CORE_VERSION = $[sed -n 1p /DietPi/dietpi/.version]
	setglobal SUB_VERSION = $[sed -n 2p /DietPi/dietpi/.version]
	sh-expr 'SUB_VERSION--'
	cat << """ > /DietPi/dietpi/.version
$CORE_VERSION
$SUB_VERSION
"""
> /DietPi/dietpi/.version
$CORE_VERSION
$SUB_VERSION
_EOF_

	G_RUN_CMD cp /DietPi/dietpi/.version /var/lib/dietpi/.dietpi_image_version

	# - Native PC/EFI (assume x86_64 only possible)
	if sh-expr ' $(dpkg --get-selections | grep -ci -m1 '^grub-efi-amd64[[:space:]]') ' &&
		test -d /boot/efi {

		G_DIETPI-NOTIFY 2 'Recreating GRUB-EFI'

		G_RUN_CMD grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=arch_grub --recheck

	}

	G_DIETPI-NOTIFY 2 'Sync changes to disk. Please wait, this may take some time...'

	G_RUN_CMD systemctl stop dietpi-ramlog
	G_RUN_CMD systemctl stop dietpi-ramdisk

	sync
	# fstrim -v /
	# sync

	G_DIETPI-NOTIFY 2 'Please check and delete all non-required folders in /root/.xxxxxx'
	G_DIETPI-NOTIFY 2 'Please delete outdated modules'
	ls -lha /lib/modules

	G_DIETPI-NOTIFY 0 "Completed, disk can now be saved to .img for later use, or, reboot system to start first run of DietPi:"

	#Cleanup
	rm dietpi-globals
	rm PREP_SYSTEM_FOR_DIETPI.sh

	#Power off system

	#Read image

	#Resize rootfs parition to mininum size +50MB

}